Přihlásit se

Please use more than 6 characters. Forgot your password? Click here to reset.

Změnit heslo

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download

Registrovat se

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download

Děkujeme za registraci u společnosti Omron

E-mail k dokončení registrace účtu byl odeslán na adresu

Návrat na webovou stránku

získejte přímý přístup

Níže zadejte své údaje a získejte přímý přístup k obsahu na této stránce

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download

Děkujeme za váš zájem

Nyní máte přístup k G7Z

E-mail s potvrzením byl odeslán na

Pokračovat na stránku

Prosím nebo získejte přímý přístup a stáhněte si tento dokument

Text error notification

Text error notification

Checkbox error notification

Checkbox error notification

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download
Česká republika

Country Selector

EuropeAfrica / Middle EastAsia / PacificGreater ChinaJapan / KoreaAmericas

G7Z

Vlastnosti

Kompaktní výkonové relé 160 A

Řada G7Z poskytuje kompaktní cenově výhodné řešení pro aplikace, jakými jsou měniče, zdroje nepřetržitého napájení a bateriové obvody solárních a palivových článků. Relé v kombinaci s pomocným blokem kontaktů splňuje požadavky normy EN 60947-4-1. Dostupné jmenovité hodnoty cívek jsou 12 a 24 VDC. Spotřeba energie je nižší než 4 W.

  • Spínaný proud 160 A (4 póly po 40 A, IEC-AC1)
  • Spínané napětí 440 V AC
  • Bezpečný provoz se zrcadlově uspořádanými kontakty v různých konfiguracích
  • Spotřeba energie nižší než 4 W
  • Nízká hlučnost spínání (70 dB)
Specifikace & informace pro objednání

Ordering information

Relay with Auxiliary Contact Block (for Screw Terminals)

Contact configuration

Rated voltage

Order code

Relay

Auxiliary contact block

4PST-NO

DPST-NO

12, 24 VDC

G7Z-4A-20Z

SPST-NO/SPST-NC

G7Z-4A-11Z

DPST-NC

G7Z-4A-02Z

3PST-NO/SPST-NC

DPST-NO

G7Z-3A1B-20Z

SPST-NO/SPST-NC

G7Z-3A1B-11Z

DPST-NC

G7Z-3A1B-02Z

DPST-NO/DPST-NC

DPST-NO

G7Z-2A2B-20Z

SPST-NO/SPST-NC

G7Z-2A2B-11Z

DPST-NC

G7Z-2A2B-02Z

Specifications

Coil ratings

Rated voltage

Rated current

Coil resistance

Must operate voltage

Must release voltage

Max. voltage

Power consumption (approx.)

% of rated voltage

12 VDC

333 mA

39 Ω

75% max.

10% min.

110%

Approx. 3.7 W

24 VDC

154 mA

156 Ω
  • Note • Rated current and coil resistance were measured at a coil temperature of 23°C with coil resistance of ±15%.
  • • Operating characteristics were measured at a coil temperature of 23°C.
  • • The maximum allowable voltage is the maximum value of the fluctuation range for the Relay coil operating power supply and was measured at an ambient temperature of 23°C.

Contact Ratings - Relay

Item

G7Z-4A-_Z, G7Z-3A1B-_Z, G7Z-2A2B-_Z

Resistive load

Inductive load cos phi = 0.3

Resistive load L/R = 1 ms

Contact structure

Double break

Contact material

Ag alloy

Rated load

NO

40 A at 440 VAC

22 A at 440 VAC

5 A at 110 VDC

NC

25 A at 440 VAC

10 A at 440 VAC

5 A at 110 VDC

Rated carry current

NO

40 A

22 A

5 A

NC

25 A

10 A

5 A

Maximum contact voltage

480 VAC

125 VDC

Maximum contact current

NO

40 A

NC

25 A

Maximum switching capacity

NO

17,600 VA

9,680 VA

550 W

NC

11,000 VA

4,400 VA

550 W

Failure rate P value (reference value)

2 A at 24 VDC

Note: The ratings for the auxiliary contact block mounted on the G7Z are the same as those for the G73Z auxiliary contact block.

Contact Ratings - Auxiliary Contact Block

Item

G7Z-4A-_Z, G7Z-3A1B-_Z, G7Z-2A2B-_Z

Resistive load

Inductive load cos phi = 0.3

Resistive load L/R = 1 ms

Contact structure

Double break

Contact material

Au clad + Ag

Rated load

1 A at 440 VAC

0.5 A at 440 VAC

5 A at 110 VDC

Rated carry current

1 A

Maximum contact voltage

480 VAC

125 VDC

Maximum contact current

1 A

Maximum switching capacity

440 VA

220 VA

110 W

Failure rate P value (reference value)

1 mA at 5 VDC

Ordering Information

Relay with Auxiliary Contact Block

Number of poles
(Relay with Auxiliary Contact)		 Contact configuration Contact Mechanism of Auxiliary Contacts
Relay Auxiliary Contact Block Single-break models Double-break models
2
Scheduled to close the order at the end of March 2019.
Rated Voltage Order code Rated Voltage Order code
4 poles + 2 poles 4PST-NO DPST-NO 12, 24 VDC G7Z-4A-20Z-R 12, 24 VDC G7Z-4A-20Z
SPST-NO/SPST-NC 12, 24 VDC G7Z-4A-11Z-R 12, 24 VDC G7Z-4A-11Z
DPST-NC 12, 24 VDC G7Z-4A-02Z-R 12, 24 VDC G7Z-4A-02Z
3PST-NO/SPST-NC DPST-NO 12, 24 VDC G7Z-3A1B-20Z-R 12, 24 VDC G7Z-3A1B-20Z
SPST-NO/SPST-NC 12, 24 VDC G7Z-3A1B-11Z-R 12, 24 VDC G7Z-3A1B-11Z
DPST-NC 12, 24 VDC G7Z-3A1B-02Z-R 12, 24 VDC G7Z-3A1B-02Z
DPST-NO/DPST-NC DPST-NO 12, 24 VDC G7Z-2A2B-20Z-R 12, 24 VDC G7Z-2A2B-20Z
SPST-NO/SPST-NC 12, 24 VDC G7Z-2A2B-11Z-R 12, 24 VDC G7Z-2A2B-11Z
DPST-NC 12, 24 VDC G7Z-2A2B-02Z-R 12, 24 VDC G7Z-2A2B-02Z
Note:
  1. Relay contact terminals are M5, and the coil terminals are M3.5.
  2. Auxiliary contact block terminals are M3.5.
  3. When placing an order, specify the model number and rated supply voltage (12 VDC or 24 VDC).

Relay

Number of poles Contact configuration Rated Voltage Order code
4 poles 4PST-NO 12, 24 VDC G7Z-4A
3PST-NO/SPST-NC G7Z-3A1B
DPST-NO/DPST-NC G7Z-2A2B
Note:
  1. Relay contact terminals are M5, and the coil terminals are M3.5.
  2. When placing an order, specify the model number and rated supply voltage (12 VDC or 24 VDC).

Accessories (Order Separately)

Auxiliary Contact Block

Number of poles Contact Configuration Order code
Contact Mechanism of Auxiliary Contacts
Single-break models Double-break models
2
Scheduled to close the order at the end of March 2019.
2 poles DPST-NO G73Z-20Z-R G73Z-20Z
SPST-NO/SPST-NC G73Z-11Z-R G73Z-11Z
DPST-NC G73Z-02Z-R G73Z-02Z
Note:

Auxiliary contact block terminals are M3.5.

Specifications

Coil ratings

Rated voltage Rated current (mA) Coil resistance (Ω) Must operate voltage Must release voltage Maximum voltage Power consumption (W)
Percentage of rated voltage
12 VDC 308 39 75% max. 10% min. 110% Approx. 3.7
24 VDC 154 156
Note:
  1. Rated current and coil resistance were measured at a coil temperature of 23°C with coil resistance of ±15%.
  2. Operating characteristics were measured at a coil temperature of 23°C.
  3. The maximum allowable voltage is the maximum value of the fluctuation range for the Relay coil operating power supply
    and was measured at an ambient temperature of 23°C. There is, however, no continuous allowance.

Contact ratings

Relay, Relay with Auxiliary Contact Block

Model G7Z-4A-⬜Z(-R), G7Z-3A1B-⬜Z(-R), G7Z-2A2B-⬜Z(-R)
Load Resistive load Inductive load cosφ = 0.3 Resistive load L/R = 1 ms
Contact structure Double break
Contact material Ag alloy
Rated load NO 40 A at 440 VAC 22 A at 440 VAC 5 A at 110 VDC
NC 25 A at 440 VAC 10 A at 440 VAC 5 A at 110 VDC
Rated carry current NO 40 A
2
Set of Relay and Auxiliary Contact Block: 45 to 60°C; for the continuous carry current, reduce 40 A by 0.7 A/°C.
NC 25 A
Maximum contact voltage 480 VAC 125 VDC
Maximum contact current NO 40 A 22 A 5 A
NC 25 A 10 A 5 A
Maximum switching capacity NO 17,600 VA 9,680 VA 550 W
NC 11,000 VA 4,400 VA 550 W
Failure rate P value (reference value) 2 A at 24 VDC
Note:

The ratings for the auxiliary contact block mounted on the G7Z are the same as those for the G73Z auxiliary contact block.

Auxiliary Contact Block

Model G73Z-20Z-R, G73Z-11Z-R, G73Z-02Z-R G73Z-20Z, G73Z-11Z, G73Z-02Z
Load Resistive load Inductive load
cosφ = 0.3		 Resistive load
L/R = 1 ms		 Resistive load Inductive load
cosφ = 0.3		 Resistive load
L/R = 1 ms
Contact structure Single break Double break
Contact material Au clad + AgNi Au clad + Ag
Rated load 1 A at 440 VAC 0.5 A at 440 VAC 0.5 A at 110 VDC 1 A at 440 VAC 0.5 A at 440 VAC 0.5 A at 110 VDC
Rated carry current 1 A 1 A
Maximum contact voltage 480 VAC 125 VDC 480 VAC 125 VDC
Maximum contact current 1 A 0.5 A 1 A 0.5 A
Maximum switching capacity 440 VA 220 VA 55 W 440 VA 220 VA 55 W
Failure rate P value (reference value) 1 mA at 1 VDC 1 mA at 5 VDC

Characteristics

Classification Relay with
auxiliary contact block
2
The specifications for the auxiliary contact block mounted on the G7Z are the same as those for the G73Z auxiliary contact block.
 Auxiliary contact block
Model G7Z-4A-⬜Z(-R), G7Z-3A1B-⬜Z(-R), G7Z-2A2B-⬜Z(-R) G73Z-20Z-R, G73Z-11Z-R, G73Z-02Z-R G73Z-20Z, G73Z-11Z, G73Z-02Z
Contact resistance
2
The contact resistance for the Relay (G7Z) was measured with 1 A at 5 VDC using the voltage drop method.
The contact resistance for the auxiliary contact block (G73Z) was measured with 0.1 A at 5 VDC using the voltage drop method.
 400 mΩ max. 100 mΩ max.
Operating time
2
The operate time was measured with the rated voltage imposed with any contact bounce ignored at the ambient temperature of 23°C.
 50 ms max.
Release time
2
The operate time was measured with the rated voltage imposed with any contact bounce ignored at the ambient temperature of 23°C.
 50 ms max.
Maximum operating frequency Mechanical 1,800 operations/h
Rated load 1,200 operations/h
Insulation resistance
2
The insulation resistance was measured with a 1,000-VDC megohmmeter applied to the same places as those used for checking the dielectric strength.
 1,000 MΩ min.
Dielectric strength Between coil and contacts 4,000 VAC, 50/60 Hz for 1 min –
Between contacts of different polarity 4,000 VAC, 50/60 Hz for 1 min
Between contacts of the same polarity 2,000 VAC, 50/60 Hz for 1 min
Impulse withstand voltage Between coil and contacts 10 kV, 1.2 × 50 µs –
Between contacts of different polarity 10 kV, 1.2 × 50 µs
Between contacts of the same polarity 4.5 kV, 1.2 × 50 µs 3.0 kV, 1.2 × 50 µs 4.5 kV, 1.2 × 50 µs
Vibration resistance Destruction 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Malfunction NO: 10 to 55 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude) NC: 10 to 32 to 10 Hz, 0.5-mm single amplitude (1.0-mm double amplitude)
Shock resistance Destruction Screw mounting: 700 m/s2, DIN Track mounting: 500 m/s2
Malfunction NO: 100 m/s2 NC: 25 m/s2
Durability Mechanical 1,000,000 operations min. (at 1,800 operations/h, contact no load)
Electrical
2
The electrical endurance was measured at an ambient temperature of 23°C.
 AC resistive load: 80,000 operations
AC inductive load: 80,000 operations
DC resistive load: 100,000 operations
(at 1,200 operations/h, rated load)
Failure rate (P level) (reference value)
2
The failure rate is based on an operating frequency of 1,800 operations/h.
 2 A at 24 VDC 1 mA at 1 VDC 1 mA at 5 VDC
Ambient operating temperature −25 to 60°C (with no icing or condensation)
Ambient operating humidity 5% to 85%
Weight Approx. 330 g Approx. 18 g
Note:

The above values are initial values.

Máte dotaz?

Jsme připraveni pomoci.

Kontaktujte nás

Odběr novinek

Informace o inovacích produktů, řešeních a službách – přímo ve vaší schránce.

Děkujeme Vám za zájem o eNovinky společnosti Omron. V krátké době od nás obdržíte e-mail. Tento e-mail obsahuje odkaz, který aktivuje zasílání eNovinek na Váš e-mail. Tento proces je vyžadován legislativou, aby se zajistilo, že nikdo nemůže zneužít vaši e-mailovou adresu.

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download

Dokumentace

Stáhněte si katalogové listy, příručky a brožury.

Stáhnout dokumentaci

Školení

Zahajte své školení u nejlepších techniků. Od začátečníků po pokročilou úroveň.

Zobrazit školení