ZX2

Vlastnosti

Stabilní, snadno použitelný a cenově dostupný snímač pro laserové měření

Vysoká přesnost a stabilita měření za dostupnou cenu. Nový snímač ZX2 pro laserové měření nabízí nejlepší výkon ve své třídě z hlediska přesnosti a rychlosti pro všechny aplikace lineárního posunu. Využívá pokročilý obrazový snímač HSDR-CMOS a umožňuje dosahovat vysoké stability měření, a to i u těch nejnáročnějších povrchů. 

  • Nastavení jedním dotykem
  • Přesnost: 1,5–5 µm
  • Jakýkoli povrch
  • Vysoká rychlost: 30 µs

Obrazový snímač HSDR CMOS

ZX2_CMOS.jpg
Laserový snímač ZX2 využívá nově vyvinutý obrazový snímač High Speed & Dynamic Range (HSDR) CMOS. To poskytuje stabilní měření na libovolném povrchu bez ztráty přesnosti – od povrchů vysoce absorbujících až po povrchy intenzivně odrážející přijaté světlo. Snímač ZX2 nepřetržitě monitoruje úroveň přijatého světla a kompenzuje zjištěné hodnoty úpravou výstupu laserové diody – to vše s dobou cyklu 60 μs.

Snadné nastavení

ZX2_Smart button.jpg
Snadné nastavení snímače ZX2 Snímač ZX2 eliminuje potřebu složitých nastavení a zdlouhavého nastavování parametrů. K dispozici je inteligentní tlačítko, pomocí kterého lze snímač nakonfigurovat nadefinováním typu povrchu pro měření.  
  • Jeden typ povrchu
  • Více typů povrchů
  • Povrchy intenzivně odrážející světlo
Všechna ostatní nastavení jsou automaticky nakonfigurována podle tohoto nastavení.

Aplikace

ZX2_App_double sheet.jpg

Aplikace pro detekci zdvojení materiálu

Díky vysoké přesnosti měření a schopnosti vyrovnat se s různými typy povrchů lze snímače ZX2 využívat pro detekci zdvojení materiálu.
ZX2_App_robot.jpg

Aplikace pro určení referenční polohy

Přesné lineární měření lze provádět ve vysoké rychlosti, což umožňuje využití snímačů ZX2 pro vysokorychlostní aplikace k určení referenční polohy.
ZX2_App_thickness.jpg

Aplikace pro měření tloušťky

Snímač ZX2 umožňuje snadno měřit tloušťku pomocí kalkulační jednotky. Přesného měření tloušťky je možné dosáhnout i u velmi lesklých povrchů.
ZX2_App_warpage.jpg

Měření zkřivení

Pomocí několika jednotek ZX2 je možné zjišťovat deformaci nebo odklon komponent. Stabilního měření lze dosáhnout i v případě, že se liší teplota nebo povrch měření.
Specifikace & informace pro objednání

Ordering information

Sensor heads

Optical system

Beam shape

Sensing distance

Resolution

Order code

Diffuse-reflective

Line beam

 

1.5 µm

ZX2-LD50L

Spot beam

ZX2-LD50

Line beam

 

5 µm

ZX2-LD100L

Spot beam

ZX2-LD100

Regular reflective

Spot beam

 

1.5 µm

ZX2-LD50V

Amplifier units

Power supply

Output type

Order code

DC

NPN

ZX2-LDA11

PNP

ZX2-LDA41

Accessories (order separately)

These are not included with the sensor head or amplifier unit.

Please order as necessary.

Calculating unit

 

Order code

Calculating unit

ZX2-CAL

Sensor head extension cables 1

Cable length

Order code

1 m

ZX2-XC1R

4 m

ZX2-XC4R

9 m

ZX2-XC9R

20 m

ZX2-XC20R

Mounting brackets

Applicable Sensor Heads

Appearance

Contents

Order code

ZX2-LD50V

ZX2-LD50L

ZX2-LD50

 

Mounting Bracket: 1

Nut plate: 1

Phillips screws (M3×30): 2

E39-L178

ZX2-LD100L

ZX2-LD100

 

 

E39-L179

Specifications

Diffuse reflective Sensor Heads

Item Model

ZX2-LD50L

ZX2-LD50

ZX2-LD100L

ZX2-LD100

Optical system

Diffuse reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 1 mW max.

EN class 2,FDA class II *5

Measurement center point

50 mm

100 mm

Measurement range

±10 mm

±35 mm

Beam shape

Line

Spot

Line

Spot

Beam size1

Approx. 60 µm×2.6 mm

Approx. 60 µm dia.

Approx.110 µm×2.7 mm

Approx.110 µm dia.

Resolution2

1.5 µm

5 µm

Linearity3

±0.05% F.S. (40 to 50 mm)

±0.1% F.S. (40 to 50 mm)

±0.05%F.S. (65 to 100 mm)

±0.1%F.S. (65 to 100 mm)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

±0.1% F.S. (entire range)

±0.15% F.S. (entire range)

Temperature characteristic4

0.02% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English), FDA certification label

Regular-reflective Sensor Heads

Item Model

ZX2-LD50V

Optical system

Regular reflective

Light source (wave length)

Visible-light semiconductor laser with a wavelength of 660 nm and an output of 0.24 mW max. EN class 1, FDA class I

Measurement center point

48 mm

Measurement range

±5 mm

Beam shape

Spot

Beam size2

Approx. 60 µm dia.

Resolution3

1.5 µm

Linearity4

±0.3% F.S. (entire range)

Temperature characteristic5

0.06% F.S./°C

Ambient illumination

Incandescent lamp: 10,000 lx max. (on light receiving side)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute.

Vibration resistance (destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 minutes. each in X,Y,and Z directions

Shock resistance (destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC 60529, IP67

Connection method

Connector connection (standard cable length: 500 mm)

Weight (packed state)

Approx.160 g (Sensor Head only: Approx.75 g)

Materials

Case and cover: PBT (polybutylene terephtahalate), Optical window: Glass, Cable: PVC

Accessories

Instruction sheet, Ferrite core, Laser warning label (English)

Note: False detection outside the measurement range can occur in the case of an object with high reflectance.

Amplifier units

Item

ZX2-LDA11

ZX2-LDA41

Measurement period6

Min 30 μs

Response time

60 µs, 120 µs, 240 µs, 500 µs, 1 ms, 2 ms, 4 ms, 8 ms, 12 ms, 20 ms, 36 ms, 66 ms, 128 ms, 250 ms, 500 ms

Analog output7

4 to 20 mA, Max. load resistance: 300Ω, ±5VDC or 1 to 5 VDC, Output impedance: 100Ω

Judgement outputs (HIGH/PASS/LOW: 3 outputs), error output

NPN open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max.,2 V max. for load current above 10 mA)

PNP open-collector outputs, 30 VDC, 50 mA max.(residual voltage: 1 V max. for load current 10 mA max., 2 V max. for load current above 10 mA)

Laser OFF input, zero reset input, timing input, reset input, bank input

ON: Short-circuited with 0-V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)

ON: Supply voltage short-circuited or supply voltage within 1.5 V
OFF: Open (leakage current: 0.1 mA max.)

Functions

Smart tuning, scaling, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, zero reset, On-delay timer, OFF-delay timer, keep/clamp switch, (A-B)calculations8, thickness calculation3, mutual interference prevention3, laser deterioration detection, bank function (4 banks)

Indications

Judgement indicators: HIGH (orange), PASS (green), LOW (orange), 11-segment main display (red), 11-segmentsub-display (orange), laser ON (green), zero reset (green), enable (green), menu (green), HIGH threshold (orange), LOW threshold (orange)

Power supply voltage

10 to 30 VDC, including 10% ripple(p-p)

Power consumption

3,000 mW max. with power supply voltage of 30 VDC and power supply current of 100 mA (with Sensor connected)

Ambient temperature

Operating: 0 to 50°C, Storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% (with no condensation)

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min.

Vibration resistance
(destruction)

10 to 150 Hz, 0.7-mm double amplitude, 80 min. each in X,Y,and Z directions

Shock resistance
(destruction)

300 m/s 2 3 times each in six directions (up/down,left/right,forward/backward)

Degree of protection

IEC60529, IP40P

Connection method

Prewired (standard cable length: 2 m)

Weight (packed state)

Approx. 200 g (unit only: Approx.135 g)

Materials

Case: PBT(polybutylene terephtahalate), Cover: Polycarbonate, Display: Acrylic resin, Button: Polyacetal, Cable: PVC

Accessories

Instruction sheet

Calculating unit

Item

ZX2-CAL

Applicable amplifier units

ZX2-LDA11/ZX2-LDA41

Current consumption

12 mA max. (supplied from the smart sensor amplifier unit)

Ambient temperature

Operating: 0 to 50°C, storage: -15 to 70°C (with no icing or condensation)

Ambient humidity

Operating and storage: 35% to 85% RH (with no condensation)

Connection method

Connector

Dielectric strength

1,000 VAC, 50/60 Hz for 1 min

Insulation resistance

100 MΩ (at 500 VDC)

Vibration resistance (destructive)

10 to 150 Hz, 0.7-mm double amplitude 80 min each in X, Y, and Z directions

Shock resistance (destructive)

300 m/s2 3 times each in six directions (up/down, left/right, forward/backward)

Materials

Case: PBT (polybutylene terephthalate), Display: Acrylic resin

Weight (packed state)

Approx. 50 g

Accessories

Instruction sheet


1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

1. Extension cables cannot be coupled and used together.

2. Beam size: Defined as 1/e 2 (13.5%) of the central intensity at the smallest value of diameter for the measurement range (typical value) False detections can occur in the case there is light leakage outside the defined region and the surroundings of the target object have a high reflectance in comparison to the target object.

3. Resolution: indicates the degree of fluctuation (±3σ) of analog output when connected to the ZX2-LDA. (The measured value is given for the center distance for OMRON’s standard target object (diffuse-reflective models: white ceramic object, regular-reflective models: 1/4 λ flat mirror) when the response time of the ZX2-LDA is set to 128 ms.)
Indicates the repetition accuracy for when the workpiece is in a state of rest. Not an indication of distance accuracy. Resolution performance may not be satisfied in a strong electromagnetic field.

4. Linearity: indicates the error with respect to the ideal straight line of the displacement output in the case of measuring Omron’ s standard target object. Linearity and measured value may vary depending on target object. F.S. indicates the full scope of the measurement range. (ZX2-LD50 (L): 20mm)

5. Temperature characteristic: Value for the case the space between the sensor head and Omron’s standard target object is secured by an aluminum jig. (Measured at the measurement center distance)

*5 These Sensors are classified as Class 2 laser devices for diffuse-reflective models and Class 1 for regular-reflective models under EN 606825-1 and the regulations of Laser Notice No. 50 for FDA certification. CDRH registration has been completed for diffuse-reflective models and is scheduled for regular-reflective models.

6. In the case of Omron’s standard target object (white ceramic)

7. Configure current output (4 to 20mA) and voltage output (±5 V or 1 to 5 V) by MENU mode.

8. Calculating unit (ZX2-CAL) is necessary.

Máte dotaz?

Jsme připraveni pomoci.

Kontaktujte nás

Odběr novinek

Informace o inovacích produktů, řešeních a službách – přímo ve vaší schránce.

Děkujeme Vám za zájem o eNovinky společnosti Omron. V krátké době od nás obdržíte e-mail. Tento e-mail obsahuje odkaz, který aktivuje zasílání eNovinek na Váš e-mail. Tento proces je vyžadován legislativou, aby se zajistilo, že nikdo nemůže zneužít vaši e-mailovou adresu.

Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]

Download

Dokumentace

Stáhněte si katalogové listy, příručky a brožury.

Stáhnout dokumentaci

Školení

Zahajte své školení u nejlepších techniků. Od začátečníků po pokročilou úroveň.

Zobrazit školení