EJ1N
Vícesmyčkový regulátor teploty do rozváděčů
Regulátor EJ1N je navržen tak, aby poskytoval snadno použitelný vícebodový řídicí systém, který díky svému modulárnímu přístupu dokáže optimalizovat zapojení a šetřit prostor.
- Zredukujte křížení kabeláže díky struktuře horizontálního propojení
K napájení celého systému stačí připojit napájecí vedení a rozhraní RS485. - Dodává se se šroubovými nebo pružnými svorkami
- Dokonale se hodí do konfigurace vašeho stroje
K jedné komunikační lince RS485 lze připojit až 64 modulů (verze se 2 nebo 4 smyčkami). - Podpora všech hlavních typů vstupních senzorů (termočlánek, Pt100, lineární)
- Zjednodušte si úkoly při uvedení do provozu díky rozsáhlé sadě funkcí, které usnadňují ladění PID
Algoritmus 2-PID pro dosažení dobré skokové odezvy i reakce na rušení, nezávislé automatické ladění při topení/chlazení prostřednictvím řízení PID, funkce nastavení překmitu rušení pro potlačení teplotních výkyvů.
Specifikace & informace pro objednání
Ordering information
Type | Control points | Control outputs | Auxiliary outputs | Other functions | Terminal | Order code |
---|---|---|---|---|---|---|
Basic unit | 2 | 2 voltage (pulse) | 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control. On the 4-point models, heating/cooling control can be performed for two input points only. |
2 CT input
2 + 2 event inputWhen using
the heater burnout alarm, purchase a Current Transformer (E54-CT1
or E54-CT3) separately. |
M3 screws | EJ1N-TC2A-QNHB |
Basic unit | 2 | 2 voltage (pulse) | 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control. On the 4-point models, heating/cooling control can be performed for two input points only. |
2 CT input
2 +
2 event inputWhen using
the heater burnout alarm, purchase a Current Transformer (E54-CT1
or E54-CT3) separately. |
Screw-less clamp | EJ1N-TC2B-QNHB |
Basic unit | 2 | 2 current | 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control. On the 4-point models, heating/cooling control can be performed for two input points only. |
2 event input | M3 screws | EJ1N-TC2A-CNB |
Basic unit | 2 | 2 current | 2 transistor (NPN)
2
For heating/cooling control applications, the auxiliary outputs on the 2-point models are used for cooling control. On the 4-point models, heating/cooling control can be performed for two input points only. |
2 event input | Screw-less clamp | EJ1N-TC2B-CNB |
Basic unit | 4 | 4 voltage (pulse) | – | – | M3 screws | EJ1N-TC4A-QQ |
Basic unit | 4 | 4 voltage (pulse) | – | – | Screw-less clamp | EJ1N-TC4B-QQ |
High function unit | – | – | 4 transistor (NPN) | 4 event input | M3 screws | EJ1N-HFUA-NFLK |
High function unit | – | – | 4 transistor (NPN) | 4 event input | Screw-less clamp | EJ1N-HFUB-NFLK |
DeviceNet unit | – | – | – | – | Screw connector | EJ1N-HFUB-DRT |
Ethernet unit
2
This unit mounts to the left of the CelciuX° (EJ1) configuration and enables PROFINET or Modbus/TCP network connection. Combine the HFU-ETN with an EDU_-NFLK end unit to use with other devices supporting Modbus-RTU like E5_N temperature controllers and MX2 Inverters. |
– | – | – | – | 3 x RJ45 | EJ1N-HFU-ETN |
End unit
2
An End unit
is always required for connection to a Basic unit or an HFU. An
HFU cannot operate without a Basic unit. |
– | – | 2 transistor (NPN) | – | M3 screws | EJ1C-EDUA-NFLK |
End unit
2
An End unit
is always required for connection to a Basic unit or an HFU. An
HFU cannot operate without a Basic unit. |
– | – | 2 transistor (NPN) | – | Removable Connector | EJ1C-EDUC-NFLK |
Accessories
Current transformer
Diameter | Order code |
---|---|
5.8 dia. | E54-CT1 |
12.0 dia. | E54-CT3 |
Communications and cables
Description | Order code |
---|---|
G3ZA connecting cable 5 meter | EJ1C-CBLA050 |
USB programming cable | E58-CIFQ1 |
PC based configuration and tuning software CX-Thermo | EST2-2C-MV4 |
PROFIBUS Gateway | PRT1-SCU11 |
Specifications
Item | Type | EJ1_-TC2 | EJ1_-TC4 |
---|---|---|---|
Power supply voltage | 24 VDC | ||
Operating voltage range | 85% to 110% of rated voltage | ||
Power consumption | 4 W max. (at maximum load) | 5 W max. (at maximum load) | |
Input (see
note)
2
Inputs are fully multi-input. Therefore, platinum resistance
thermometer, thermocouple, infrared thermosensor, and analog input
can be selected. |
Thermocouple: K, J, T, E, L, U, N, R, S, B, W, PLII ES1B Infrared Thermosensor: 10 to 70°C, 60 to 120°C, 115 to 165°C, 140 to 260°C. Analog input: 4 to 20 mA, 0 to 20 mA, 1 to 5 V, 0 to 5 V, 0 to 10 VPlatinum resistance thermometer: Pt100, JPt100 |
||
Input impedance | Current input: 150Ω max., voltage input: 1 MΩ min. | ||
Control outputs | Voltage output | Output voltage: 12 VDC ±15%, max. load current: 21 mA (PNP models with short-circuit protection circuit) | |
Transistor output | Max. operating voltage: 30 V, max. load current: 100 mA | – | |
Current output | Current output range: 4 to 20 mA or 0 to 20 mA DC Load: 500 Ω max. (including transfer output)(Resolution: Approx: 2,800 for 4 to 20 mA DC, approx. 3,500 for 0 to 20 mA DC) | – | |
Event inputs | Input points | 2 | – |
Contact input | ON: 1 kΩ max., OFF. 100 kΩ min. | – | |
Non-contact input | ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max. | – | |
Outflow current: approx. 4 mA per point | – | ||
Number of input and control points | Input points: 2, control points: 2 | Input points: 4, control points: 4 | |
Setting method | Via communications | ||
Control method | ON/OFF control or 2-PID (with autotuning, selftuning, Heat & Cool autotuning and non-linear cool output selection) | ||
Other functions | Two-point input shift, digital input filter, remote SP, SP ramp, manual manipulated variable, manipulated variable limiter, interference overshoot adjustment, loop burnout alarm, RUN/STOP, banks, I/O allocations, etc. |
||
Alarm output | 2 points via End unit | ||
Communication | RS-485, PROFIBUS, Modbus, DeviceNet | RS-485, PROFIBUS, Modbus, DeviceNet | |
Size in mm (W×H×D) | 31×96×109 | ||
Weight | 180 g | ||
Ambient temperature range | Operating –10 to 55°C, Storage –25 to 65°C (with no icing or condensation) | ||
Ambient humidity range | Operating 25% to 85% (with no condensation) |
Dimensions
Item | Size in mm (H×W×D) |
---|---|
EJ1N-HFU_-NFL_ | 95.4×31.0×104.9/109.0 |
EJ1N-HFUB-DRT | 90.9×31.0×82.2 |
EJ1C-EDU | 95.4×15.7×76.2/79.7 |
Jak vám můžeme pomoci?
Pokud máte dotazy nebo chcete požádat o cenovou nabídku, obraťte se na nás nebo nám zašlete žádost.
Kontaktujte nás EJ1N
Děkujeme Vám za odeslání vašeho požádavku. Budeme Vás kontaktovat co nejdříve.
Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]
DownloadNabídka pro EJ1N
Vyplněním tohoto formuláře můžete požádat o cenovou nabídku vybraného produktu. Prosím vyplňte všechna povinná pole označená *. S vašimi osobními údaji bude nakládáno důvěrně.
Děkujeme Vám za vaši žádost o cenovou nabídku. Požadované informace Vám poskytneme co nejdříve.
Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]
DownloadOdbornost
Omezte křížení kabeláže díky struktuře horizontálního propojení
Diagnostika topných těles
Potlačení teplotních výkyvů
Související produkty
-
Jeden software pro váš automatizační systém
-
Výkonná vizualizace strojů
-
Podpůrný software pro počítače PC slouží k nastavování a sledování