ZG2
Jednoduché měření profilů - Teach & Go
ZG2 umožňuje precizní měření tvarů u problematických materiálů a povrchů. Jednoduché a intuitivní uživatelské rozhraní umožňuje efektivní instalaci, nastavení a provoz. Na vestavěném LCD monitoru se zobrazují výsledky měření v reálném čase.
- Snadno použitelné - intuitivní uživatelské rozhraní
- Reálný čas - vestavěný LCD pro nastavení a okamžité zobrazení profilu
- Univerzální - 18 měřicích nástrojů
- Přesný - rozlišení 5 µm (3 mm / 631 pixelů)
- Široké profily - až 70 mm
Specifikace & informace pro objednání
Ordering information
Sensor heads
Note: - For details, refer the ratings and specifications table.
- Designate the cable length (0.5 m, 2 m) when ordering.
Sensor controllers
ZG2-WDC11A1 |
||
Accessories (order separately)
Real-time parallel output unit
RS-232C cable
Sensor head extension cable
Parallel mounting adaptor
Controller link unit
Memory card
Specifications
Sensor heads
Height direction1 |
||||||||
Linearity (in the height direction)2 |
||||||||
Temperature characteristic3 |
||||||||
5 mW max. output, 1 mW max. exposure (without using optical instruments) |
||||||||
Class 2M of EN60825-1 / IEC60825-1 |
Class 2 of EN60825-1 / IEC60825-1 |
|||||||
Beam shape (at measurement center distance)4 |
||||||||
STANDBY: Lights when laser irradiation preparation is complete (indication color: green) |
||||||||
LD_ON: Lights when the laser is irradiating (indication color: green) |
||||||||
Illumination on the photo-receiving face 7,000 lx max.: Incandescent lamp |
||||||||
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
||||||||
10 to 150 Hz with 0.35 mm single amplitude for 80 min each in X, Y, and Z directions |
||||||||
150 m/s², 3 times each in 6 directions (up / down, right / left, forward / backward) |
||||||||
Case: Aluminum diecast, Front cover: Glass, Cable insulation: Heat-resistive polyvinyl chloride (PVC), |
||||||||
Laser labels (EN: 2 labels, FDA: 3 labels), Ferrite core (1), Instruction manual |
*1 Obtained by setting an Omron standard measurement object at the measurement center distance and determing the average height of the beam line. The conditions are given in the table below. However, satisfactory resolution cannot be attained in strong electromagnetic fields.The minimum resolution of the ZG2-WDS8T/WDS3VT is 0.25 ƒÊm, even when the average number of operations is increased. Resolution does not go any lower.
*2 The tolerance for an ideal straight line obtained by determing the average height of an Omron standard measurement object for the beam line. The CCD high-resolution mode is used. Linearity varies depending on the measurement object.
*3 A value attained by using an aluminum jig to secure the distance between the Sensor head and the measurement object. The CCD standard mode is used.
*4 Defined as 1/e 2 (13.5%) of the center light intensity. This may be influenced when light leakage also exists outside the defined area and the reflectivity of the light around the measurement object is higher than that of the measurement object.
Sensor controllers
Measurement cycle 2 |
16 ms (high-precision mode), 8 ms (standard mode), 5 ms (high-speed mode) |
|||
Select voltage or current (using the sliding switch on the bottom surface) |
||||
ON: Power supply voltage short or |
||||
Parall output3 |
||||
Height, 2-point Step, 3-point Step, Edge position, Edge width, Angle, Intersection coordinates, Intersection angle, Sectional area |
||||
Filter, Laser power adjustment, Position correction (height, position, lope), Linked operation, Point of inflection measurement |
||||
1,000 VAC, 50 / 60 Hz for 1 min between lead wires and Controller case |
||||
Operating: 0 to 50°C, Storage: -15 to 60°C (with no icing or condensation) |
||||
Vibration frequency: 10 to 150 Hz, single amplitude: 0.35 mm, acceleration: 50 m/s² |
||||
150 m/s², 3 times each in 6 directions (up/down, right/left, forward/backward) |
||||
Approx. 300 g (including cable) (Packed state: Approx. 450 g) |
||||
ZG2-WDC_1: Large Ferrite Core (1 piece), Instruction Manual ZG2-WDC_1A: Large Ferrite Core (1 piece), Small Ferrite Core (2 pieces), Instruction Manual, Setup Support Software (CD-ROM), USB cable (1 m) |
Data storage unit
24 |
||||
ON: Power supply voltage short or power supply voltage |
||||
No. of logged data5 |
Profiles saved: 5,120 profiles Measurement values saved: 65,000 values max.6 |
|||
Memory card (256 MB)7 |
Profiles saved: 35,328 profiles max. (256 profiles x 138 files) Measurement values saved: 7,150,000 values max. (65,000 values x 110 files) |
|||
External triggers, data triggers (self-triggers), and time triggers |
||||
Operating: 0 to 50°C, Storage: 0 to 60°C (with no icing or condensation) |
||||
2. The image input periods listed here are for fixed/auto sensitivity. The image input period will be longer for multi-sensitivity, high-speed multi-sensitivity, or other settings. When the high-power mode is ON, the shortest image input period is 95 ms regardless of the setting of the CCD mode. Use the eco monitor in the RUN mode to determine the actual image input period.
5. Data is saved in the memory of the main unit during logging. The data is automatically saved in a memory card after logging is completed. The maximum number of logging differs according to set conditions. For details, refer to the Users Manual.
2. The image input periods listed here are for fixed/auto sensitivity. The image input period will be longer for multi-sensitivity, high-speed multi-sensitivity, or other settings. When the high-power mode is ON, the shortest image input period is 95 ms regardless of the setting of the CCD mode. Use the eco monitor in the RUN mode to determine the actual image input period.
5. Data is saved in the memory of the main unit during logging. The data is automatically saved in a memory card after logging is completed. The maximum number of logging differs according to set conditions. For details, refer to the Users Manual.
Jak vám můžeme pomoci?
Pokud máte dotazy nebo chcete požádat o cenovou nabídku, obraťte se na nás nebo nám zašlete žádost.
Kontaktujte nás ZG2
Děkujeme Vám za odeslání vašeho požádavku. Budeme Vás kontaktovat co nejdříve.
Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]
DownloadNabídka pro ZG2
Vyplněním tohoto formuláře můžete požádat o cenovou nabídku vybraného produktu. Prosím vyplňte všechna povinná pole označená *. S vašimi osobními údaji bude nakládáno důvěrně.
Děkujeme Vám za vaši žádost o cenovou nabídku. Požadované informace Vám poskytneme co nejdříve.
Objevili se technické potíže. Odeslání Vašeho formuláře nebylo úspěšné. Prosím přijměte naši omluvu a zkuste to znovu později. Podrobnosti: [detaily]
DownloadVlastnosti
Width - Car body
The sensor checks the correct width between different parts of the car body.
Bottom PCB board
The sensor checks the warpage of a PCB board to avoid soldering or connection defects.
Area glue bead
The sensor checks the area (shape) of the glue to control the continuous motion of a robot.
Position – Sheet
The sensor checks the wandering of paper over time in order to detect drifts.
Angle – Seat
The sensor checks the differences of seat angles. The controller allows you to calculate various angles via the definition of additional tasks.